Product 100% Made in Italy
Semi-automatic hydraulic double miter + electronic speed variator
260 BSA VAR-E
Versatile hydraulic double miter bandsaw with speed variator. With a footprint of less than 1 m², the 260 is the most compact in its range. Studied in every detail to minimize downtimes with easy and practical working operations. The heavy-duty construction ensures consistent cutting performance.
Thanks to the Carif Patented Hydraulic System with feed and pressure regulator, the 260 can cut any type of material and thickness. The blade cuts through the material with constant auto-regulation according to the material cross-section, significantly improving performance and extending blade life.
Cutting capacity: Ø220 mm (8.7″) ; 260 x 150 mm (10.2″ x 5.9″)
- No installation required. Plug in and start cutting.
- 2 years warranty
- Instruction manual and spare parts list
- Free technical support by phone/email
technical specifications
| 90° | -45° | +45° | +60° | ||
|---|---|---|---|---|---|
 | 220 mm | 130 mm | 150 mm | 90 mm | |
 | 220* / 205 mm | 100 mm | 150 mm | 80 mm | |
 | 260 x 150 mm | 120 x 100 mm | 150 x 150 mm | 90 x 60 mm | |
 | 2,2 kW | ||||
| Electronic variator: 15 ÷ 100 m/min. | |||||
 | 2.450 x 27 x 0,9 mm | ||||
 | B 1.250 mm | L 640 mm | H 1.650 mm | h 830 mm | Kg 350 |
*With thickness
Features
The main features of the 260 BSA VAR-E
DOUBLE MITER
Miter cutting both ways +60°/-45°. The frame rotates on tapered roller bearings, independently of the support planes on which the material rests.
GEAR PUMP
Hydraulic system for a smooth adjustment of the bow feed and cutting pressure. At cycle start, the vise clamps hydraulically and the saw bow automatically descends. At the end of the cutting operation, the vise opens and the saw bow automatically returns to its initial upper position.
BLADE MOTOR
2.2 KW motor with inverter; cutting speed range 15:100 m/min (49:328 ftm)
CONTROL PANEL
Practical, simple and ergonomic, it can be positioned on all sides of the machine to facilitate different working operations. Integrated with a Display to set the blade speed, to memorize start cutting position and piece-counter.
POTENTIOMETER
Memorization of the cutting start position. At the end of the cycle, the saw frame automatically returns to the preset position. Possible to modify the end cut position.
WORKING PLANES
Two large work tables provide a practical and comfortable working surface. The machine already offers a wide cutting capacity with a single table, while the second one is usually kept as a spare. Once worn, the tables can be turned upside down, always providing a new working surface.
FRAME
Bow made of a special hardened aluminum alloy, machined in a single setup on a machining center. High-quality finish with smooth, glossy coating and inclined at 30° to minimize blade length and ensure precise, straight cuts.
CHIPS TANK
Large chip tray complete with a perforated tank that allows coolant to pass through while retaining swarf. Easy to clean.
MEASURING DEVICE
Measuring hard stop L=500 mm with height regulation.
VIDEO
CARIF 260BSA Semi-Automatic fully Hydraulic
Presentation and quick first cutting guide on CARIF 260BSA, the most compact and efficient completely hydraulic bandsaw @carifsawingmachines
